|Manufacturer||THE GORILLA GLUE COMPANY|
|Place of Business||CINCINNATI, OH, 45241 US|
|Parcel Dimensions||5.6 x 5.4 x 0.2 cm; 280 Grams|
|Item model number||6200201|
|Item Package Quantity||1|
|Included Components||Gorilla Wood Glue 8oz|
|Item Weight||280 g|
|Country of origin||USA|
Gorilla Wood Glue, Indoor & Outdoor Carpentry Projects, Paintable, Sandable, Moisture Resistant, Clamping, Natural Color, 8oz/236mL, (Pack of 1), 6200201
Enhance your purchase
|Item Package Quantity||1|
|Item volume||236 Milliliters|
About this item
- Gorilla Wood Glue, a PVA glue, offers the benefits of an easy-to use, water-based adhesive, with Gorilla strength
- This PVA glue is incredibly water resistant and dries a natural color that offers an invisible bond line for your projects
- Best for building, carpentry or hobby projects utilizing hardwoods, softwoods and natural wood composites
- A high-quality product that is designed for both indoor and outdoor woodworking and carpentry projects
- Complete projects faster; requires only 20 - 30 minutes of clamp time, fully cured in 24 hours
Customer ratings by feature
Special offers and product promotions
- Buy at least 5 products of your choice among the eligible products and save 5%. Offered by Amazon.ca. Here's how (restrictions apply)
From the manufacturer
|Click Here to Learn More||Click Here to Learn More||Click Here to Learn More||Click Here to Learn More||Click Here to Learn More||Click Here to Learn More|
|Explore More Glues from Gorilla||Gorilla Wood Glue 4oz/118mL||Gorilla Glue Super Glue 2x3g||Gorilla Wood Glue 18oz||Gorilla Wood Glue 1 Gallon||Gorilla Glue Super Glue 20g||Gorilla Glue Original 4oz/113.4g|
Gorilla wood glue is the adhesive that woodworkers, carpenters, and hobbyists trust for their woodworking projects. This PVA glue, offers the benefits of an easy-to use, water-based adhesive, with the holding power Gorilla is known for. Our PVA glue is incredibly water resistant and dries a natural color that offers an invisible bond line for your projects.
Directions: for best results, it is essential that the wood surfaces are prepared prior to application of glue. For laminating, the surfaces should be planed smooth, leaving the board surface free from machine marks, tear-out and snipes. Also, be careful to avoid burnishing and end snipes. In general, apply a generous amount of glue on one of the surfaces. On hard-to-glue woods, apply the glue on both surfaces. Rub together with the other surface to distribute the glue evenly on both surfaces. Enough glue should be applied so that a fine bead of glue squeeze-out will occur when clamping.
Coverage: one gallon of Gorilla wood glue will cover about 200 square feet. One fluid ounce will cover approximately 1.6 square feet. Clamping: the technique and type of clamp to be used is determined by many factors. In general, apply enough pressure that will cause a fine bead of glue to squeeze out when the proper pressure is applied.
Clamping time (amount of time pressure needs to remain applied): 20–30 minutes for room temperature applications. The temperature must be above 55°f. Note that clamping time can be dependent on temperature, humidity, and the porosity of the wood.
Cure time (amount of time for glue to reach TOTAL bonding strength): 24 hours.
Clean up while glue is wet: use a clean, damp cloth to wipe off excess glue. When areas have completely dried, sand as needed.
Click on the Gorilla link at the top of this page to see other quality products from the Gorilla glue company.
Reviewed in Canada on June 4, 2020
Reviews with images
Top reviews from Canada
There was a problem filtering reviews right now. Please try again later.
By Nicki M on June 4, 2020
By Joe on July 9, 2022
I used it to glue one of the legs of my 3-leg wooden lamp. I allowed it to cure for 24hr before standing it, but the glued leg didn't hold up, it started to bend away, the glue was not set completely.
So I cleaned off the glue and reapplied it, this time I let it cure for 3 days. It seemed to hold up this time, or so I thought, when I returned after a few hours, I noticed that the leg had bent away again and the lamp was leaning against the wall. The lamp weight is about 5 pounds only.
Also the dispenser surrounding the nozzle accumulates glue, which hardens, making it impossible to use again without picking it out of a very small and fragile opening with tweezers. Very difficult and annoying and ruined my tweezers but nothing else could get it out.
You don’t even need a lot. I used this to convert nightstands into a tall boy dresser, this worked amazing! The added plus is even if you get a bit sloppy you don’t really have to fret because the small smudges I had dried clear(Transparent). We’ve been shaking, pushing and pulling the bonded dresser and it hasn’t budged an inch. They are attached very securely.
By Catch22 on March 31, 2020
The glue is very viscous and it's not easy to fill in the gaps when doing repairs. I'm diluting with a little bit water and use it repair jobs.