|Manufacturer||Krystal Resin LTD|
|Parcel Dimensions||30 x 28 x 15 cm; 8.22 Kilograms|
|Size||2 Gallon Kit (7.6 Litre)|
|Item Weight||8.22 kg|
2 Gallon Kit (7.6 Litre) Krystal Resin | Crystal Clear Epoxy Resin Kit | Non-Toxic, Odor Free | High Gloss Thick Clear Coat | For Table Tops, Bar Tops, Counter Tops and Artworks | 50:50 Mixing Ratio | 100% Solid
Enhance your purchase
- [ PREMIUM QUALITY ] The product cures to a clear, high build, glass like finish that resists scratching, yellowing and will not distort with age
- [ NON-TOXIC ] Enjoy this safe low odor and non-toxic resin epoxy for any kind of job
- [ EASY TO USE ] Krystal Resin kit is a 100% solid, two component, clear polymer coating that is mixed at 1 to 1 ratio by volume
- [ HIGHLY RESISTANT ] This product is scratch resistant, water resistant and will not exhibit blushing or sweat out under high humidity conditions
- [ WHAT'S INCLUDED & COVERAGE ] Each kit contains a bottle of resin (1 Gal) and a bottle of hardener (1 Gal)
Buy it with
Have a question?
Find answers in product info, Q&As, reviews
Your question might be answered by sellers, manufacturers, or customers who bought this product.
Please make sure that you've entered a valid question. You can edit your question or post anyway.
Please enter a question.
About Krystal Resin
Clear epoxy coating for table tops, bar tops, counter tops and artistic applications. Our product is used extensively by many artists,contractors, commercial restaurant chains throughout the world and also by many do-it-yourselfers.
Krystal Resin kit is a 100% solid, two component, clear polymer coating that is mixed at a 1 to 1 ratio by volume. Each kit contains a bottle of resin and a bottle of hardener. The product cures to a clear, high build, glass like finish that resists scratching, yellowing and will not distort with age. Items coated with it will become permanently preserved and protected for your enjoyment throughout a lifetime. This product will not exhibit blushing or sweat out under high humidity conditions.
The product should be applied in two stages. The first stage is referred to as the seal coat. The seal coat is brushed on in a thin layer and is used to seal any pores in the surface and prevent air bubbles from forming in the following flood coats. This stage is followed by the flood coat, which will flow and self level, clean brushes or squeegee can be used to help spread the epoxy. Flood coats are applied in 1/8" (3mm) layers at a time, as many as desired can be applied, however one to three coats is average for most table or bar coatings.
Recoating can usually be be done within 6 to 8 hours. If re-coated within this time period no sanding is necessary between layers. If your previous layer has fully dried, very light sanding with 220 grit sandpaper is recommended to achieve a good bonding surface. After sanding you should wipe down with a solvent such as denatured alcohol or acetone to remove any impurities from the surface. (do NOT use mineral spirits).
Authentic Krystal Resin Products
At Krystal Resin, you can buy our high quality products with confidence.
Reviews with images
Top reviews from Canada
There was a problem filtering reviews right now. Please try again later.
Tala kay design
By Tala K. on February 2, 2021
Tala kay design
By RC on January 25, 2021
By Emily Smith on January 22, 2021
By AAV on June 20, 2021