As long as your things to bond are free of moisture.oils ,rust,dust etc. this product should work fine.It would be a good idea to rough up the shaft with fine sand paper to get a good bond.
This will work . You must clean your tank. You must rough the surface as much as possible. The best way is with a 40 grit sand paper. You will get great job done.
What Happens If Epoxy Resin Freezes?
If epoxy resin freezes in its liquid state, simply move it to a warm place and allow it return it to room temperature before using it. Once it returns to room temperature, it will perform and cure normally.
Hi Trevor,
This is not a right product for your application. You will need our Instant glue Plastic or Metal. If the gap is tiny, you will need to use Plastic and if larger gap you can use Metal which has higher viscosity. Unfortunately, We cannot guarantee the outcome because we do not know all the details and we can…
see more
Hi Trevor,
This is not a right product for your application. You will need our Instant glue Plastic or Metal. If the gap is tiny, you will need to use Plastic and if larger gap you can use Metal which has higher viscosity. Unfortunately, We cannot guarantee the outcome because we do not know all the details and we cannot supervise the task. We wish you a good luck. You can buy these two products on Amazon as well.
Regards,
CECCORP
see less
Hi Trevor,
This is not a right product for your application. You will need our Instant glue Plastic or Metal. If the gap is tiny, you will need to use Plastic and if larger gap you can use Metal which has higher viscosity. Unfortunately, We cannot guarantee the outcome because we do not know all the details and we cannot supervise the task. We wish you a good luck. You can buy these two products on Amazon as well.
Regards,
CECCORP
We recommend C-Poxy 30 for that application. 4.25 Oz is enough for that size, but it depends on the gap fill.
Please note, since we are not involved in all the details of your application, we cannot guarantee the results. We recommend performing some tests on samples before using our products on your actual applica…
see more
We recommend C-Poxy 30 for that application. 4.25 Oz is enough for that size, but it depends on the gap fill.
Please note, since we are not involved in all the details of your application, we cannot guarantee the results. We recommend performing some tests on samples before using our products on your actual application. Note: The data contained herein is obtained in CECCORP Laboratories and is provided for the sole purpose of informing. We do not accept responsibility for the results obtained by others whose methods are not under our control. It is the user’s responsibility to determine suitability for their purpose of any product mentioned herein. CECCORP disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose. CECCORP specifically disclaims any liability for consequential or incidental damages of any kind, including loss of profit.
see less
We recommend C-Poxy 30 for that application. 4.25 Oz is enough for that size, but it depends on the gap fill.
Please note, since we are not involved in all the details of your application, we cannot guarantee the results. We recommend performing some tests on samples before using our products on your actual application. Note: The data contained herein is obtained in CECCORP Laboratories and is provided for the sole purpose of informing. We do not accept responsibility for the results obtained by others whose methods are not under our control. It is the user’s responsibility to determine suitability for their purpose of any product mentioned herein. CECCORP disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose. CECCORP specifically disclaims any liability for consequential or incidental damages of any kind, including loss of profit.
We will have a new product called C-Coat that will be available on Amazon in a few months. That would perfectly serve what you need.
Hope this helps.
Regards,
CECCORP
