Customer Review

Reviewed in Canada on June 24, 2019
I tried using this resin on a large 84" x 36" table top I am building for the laundry room. You need to make sure you follow the proper pouring process. I had divots on the surface as I did not follow the proper flooding process. It dries overnight and hard after 2 days. When you mix and the room temp is less than 70 F, the mixture will take time to clear. I polyurethane d my table top before applying and I was able to minimize the bubbles. The resin is thick and make sure you do 1:1 ratio as per the instructions. Low VOC and bearable. work outside the house like in the garage, the smell dissipates after 24 hours and when the resin is cured.
16 people found this helpful
Report abuse Permalink